FILL WATERTANK
“You need to add water to the water container. If the inscription does not disappear after filling the container, contact the service center.
COFFEE BEANS EMPTY
“We need to add more coffee. If you added more coffee and pressed the coffee preparation button, this message appears again, try again by first increasing the grinding degree on the grinding adjustment. If there are no changes, contact the service center for help.
WARMING UP….
“It’s heating up. You need to wait until the machine warms up and enters operating mode. If after four to five minutes the inscription does not disappear and the machine does not return to operating mode, contact the service center.
ENERGY SAVING
“This inscription indicates that the energy saving mode is turned on. To continue using the coffee machine, press the appropriate button ( OK/MENU).
DREGDRAWER FULL
“You need to empty the waste coffee container without turning off the coffee machine. Even if the container is currently empty, take it out and after five-eight seconds put it back in place.
DREGDRAWER MISS
“You need to insert a waste coffee container and a drip tray.
VENTILATE
“You need to run water through the water tap until the inscription disappears. If water has been spilling for a long time and the inscription does not disappear, you need to check the tightness of the water container and the absence of foreign debris (coffee beans) under the container. If the inscription does not disappear when water is spilled again, we recommend contacting a service center.
STEAM WARMING UP…..
“The steam boiler is heating up. If you do not need steam, turn off the steam supply using the steam button or turning the steam wheel. If you need to prepare a cappuccino or other milk drink, then wait for the inscription STEM READY FOR USE, which means the steam is ready to be supplied.
STEM READY FOR USE
“The steam is ready to be supplied. You can prepare milk foam for cappuccino and other milk drinks. To exit the steam supply mode, press the steam button or turn the steam wheel.
OVERTEMPERATURE
“ This inscription indicates that the coffee machine boiler is cooling down after making steam. To speed up the cooling process, run water through the steam tap until the sign disappears.
RINSING
“The coffee machine performs preventive rinsing of the coffee tract (system). You need to wait.
RINSING CYCLE
« The automatic rinsing cycle is activated. Do not turn off the coffee machine. The coffee machine will pour water through the coffee supply unit (dispenser) and water tap. You need to place the container and drain it when filling. If necessary, add water to the water container. This function is activated as a result of an accidental click while exploring the menu. This function is also turned on after descaling (decalcification) to flush out the reagent.
What does the inscription mean
Users of Saeco Royal cappuccino and Gaggia coffee machines have noticed that this brand quite often displays a ventilate error, or rather, a request to vent the system from air stuck in it.
This starts to happen especially often when the car is more than 3 years old. If the coffee maker is maintained regularly and parts are replaced, the inscription may appear rarely.
What to do if “decalcify ventilate” appears at the same time in a Saeco royal cappuccino or Gaggia coffee machine. This suggests that these two commands are somehow connected, that is, the problem may be in cleaning, and cleaning is needed because of the quality of the water.
Saeco coffee machine error codes
Coffee makers and coffee machines, like any equipment, require proper attention and care. If you have a more modern coffee machine and errors are shown only in numbers, then you need another article. Everyone knows and understands that if you do not maintain your coffee machine on time, sooner or later it will start to work poorly or brew tasteless coffee. In order not to bring the coffee machine to a deplorable state, they are equipped with signals that will help you understand what is wrong with your coffee machine. Below is a basic list of saeko errors and how to deal with them.
If this article does not help you, contact our specialists.
Background of the problem
Hard city water is the biggest problem for household appliances, not just coffee makers. Salts are deposited quickly, since the device works with hot liquid. In addition, mucus can accumulate on parts if the liquid is not sufficiently cleaned before entering the water supply.
If the coffee machine says ventilate, it means air has entered the system in the following cases:
- the filter is clogged;
- the water supply hose is pinched;
- The silicone hoses are dry, cracked and suck air during operation.
How to fix it yourself
When the ventilate message appears on the Saeco, you need to press the water supply button and pour about a glass into a container until the message disappears. Sometimes it appears during intensive work, when coffee and cappuccino are being prepared at the same time. The watering process takes time, so it is better to eliminate the cause radically and take the unit to a service center.
There they will check the entire system separately - perhaps the seals or gaskets are leaking somewhere - they will have to be changed, otherwise purchased water will be poured out in vain. You may need to clean the magnetic valve or boiler, replace the pump or flow meters. If, during a home inspection of a coffee machine, heating boilers are found in which there is no water, then in such a situation you need to take the machine to a service center.
Did you like the article? Share with your friends:
Ventilate is a message for the user that appears from the electronic unit of coffee machines of the Saeco brand or those manufactured on the basis of this model, or under license: Royal cappuccino, Gaggia, Vienna digital, Café Nova, Turmix and others. Sometimes the command on the display is double: decalcify ventilate, which means decalcify and remove air from the system.
Troubleshooting Saeco coffee machines in Kyiv
If this article did not help you, we will be happy to provide you with a free consultation over the phone. Always keep your coffee machine clean and have it serviced on time, and then the equipment will please you for a long time.
Never leave your coffee machine in a room where the temperature may drop below zero, as this can lead to serious and costly damage. If you still do not have the opportunity to remove the coffee machine from such a room, then leave it on. Perhaps the heat from the boiler will be enough to prevent the tubes and hoses inside the coffee machine from freezing. Or completely drain all water from the system.
What does the inscription mean
Users of Saeco Royal cappuccino and Gaggia coffee machines have noticed that this brand quite often displays a ventilate error, or rather, a request to vent the system from air stuck in it.
This starts to happen especially often when the car is more than 3 years old. If the coffee maker is maintained regularly and parts are replaced, the inscription may appear rarely.
What to do if “decalcify ventilate” appears at the same time in a Saeco royal cappuccino or Gaggia coffee machine. This suggests that these two commands are somehow connected, that is, the problem may be in cleaning, and cleaning is needed because of the quality of the water.
Background of the problem
Hard city water is the biggest problem for household appliances, not just coffee makers. Salts are deposited quickly, since the device works with hot liquid. In addition, mucus can accumulate on parts if the liquid is not sufficiently cleaned before entering the water supply.
If the coffee machine says ventilate, it means air has entered the system in the following cases:
- the filter is clogged;
- the water supply hose is pinched;
- The silicone hoses are dry, cracked and suck air during operation.
The machine stops working, but at the same time it heats up and sounds are heard from inside.
Video: All errors of the Saeco coffee machine
All three problems can be directly related to the liquid that is poured into the container. The filter has its own resource - about 2000 cups, provided that high-quality water is filled. If you use it uncleaned, the filter fails much earlier: 1.5 - 2 months.
A piece of scale or sand that has come off and become stuck in the system can jam the hose.
In this case, the machine will display a double message.
Due to contamination or the use of unprofessional cleaning products, silicone hoses can deteriorate faster. If a crack appears in them, the pump will take in air, and there will be a puddle of water under the device. If there are two pumps, then each one will have to be checked separately. Damaged tubes must be replaced, and then use special solutions or tablets designed for this type of coffee machine.
How to fix it yourself
When the ventilate message appears on the Saeco, you need to press the water supply button and pour about a glass into a container until the message disappears. Sometimes it appears during intensive work, when coffee and cappuccino are being prepared at the same time. The watering process takes time, so it is better to eliminate the cause radically and take the unit to a service center.
There they will check the entire system separately - perhaps the seals or gaskets are leaking somewhere - they will have to be changed, otherwise purchased water will be poured out in vain. You may need to clean the magnetic valve or boiler, replace the pump or flow meters. If, during a home inspection of a coffee machine, heating boilers are found in which there is no water, then in such a situation you need to take the machine to a service center.
Did you like the article? Share with your friends:
The main mistakes of the Saeco Royal, Saeco incanto, Saeco Magic and others coffee machines
The display does not light up or there are no inscriptions on it:
Check whether the coffee machine is connected to the network, check the on/off button, check whether the door of the coffee machine is tightly closed, as it presses the fuse that does not allow the coffee machine to operate when open.
VENTILATE
Air has entered the hydraulic system. It is necessary to run water through the tap. Most likely, immediately after switching on, instead of water there will be splashes of steam, but gradually water should appear and the error will disappear. If the error still remains, then more serious intervention in the inside of the coffee machine is necessary.
DECALCIFY
The coffee machine can work and make delicious coffee, but it is advisable to do some cleaning and decalcification if you want to continue using the coffee maker.
WARMING UP
The coffee machine is heating up. If the inscription does not disappear within 10 minutes, you must contact the service center, because there may be breakdowns in the water heating system.
SELECT PRODUCT, READY FOR USE
HOORAY! The equipment is completely ready for use. Enjoy delicious coffee
COF. BEANS EMPTY
The coffee maker is working and ready to use, but you need to add coffee. Pour in coffee and restart the coffee machine. If the inscription still remains, you need to contact the Brayval-coffee service center
FILL WATER TANK or WATER TANK EMPTY
It is necessary to fill the tank with water and install it correctly in the desired position. If the inscription does not disappear, you need to run water through the system. To do this, open the water supply through the tap. If this does not help, contact the service center. Perhaps you have problems with the hydraulic system of the coffee maker.
DREGDRAWER FULL
The waste coffee grounds container is full. The pulp bin needs to be cleaned. If it is not full and this inscription is on, then you need to remove the hopper for 30 seconds and insert it back. If after this the inscription does not disappear, you must take the machine to a service center.
DREGDRAWER MISS
The coffee machine does not see the waste coffee hopper. This can happen if the hopper is installed incorrectly or if the sensor breaks. Try fixing the waste coffee hopper; if this does not help, you will have to take the coffee machine in for repair. Most likely your hopper presence sensor is broken.
BREW UNIT BLOCK
The working unit (press) is blocked. It is necessary to restart the coffee machine so that the working group goes through a full cycle and gets into the correct position. If the working group does not turn or the error does not disappear, then repair of the coffee machine is necessary.
BREW UNIT MISS
The working unit (press) is inserted incorrectly, try inserting it correctly. If it is installed correctly, then most likely there is something wrong with the electronics or sensors. You need to contact the Braival service center
GRINDER BLOCKED
The coffee grinder is blocked. Perhaps there was debris, a twig or a pebble in it. It is necessary to turn off the coffee machine and clean the coffee grinder with a vacuum cleaner, if possible, remove all excess. If there are no obvious reasons, you can start the coffee machine again.
ENERGY SAVING
The coffee machine has entered energy saving mode. This helps save electricity consumption during periods when you do not use the coffee machine for a long time, such as at night or on weekends. Press the power button and the machine will begin to heat up. This function can be disabled or the activation time can be changed.
OVERTEMPERATURE
The coffee machine is overheated, you need to drain the water using the tap. This message may appear after using the steam function or if it breaks down. If the spill does not help, then you need to figure out what is the reason for this behavior of the coffee machine.
STEAM WARMING UP
The steam heating process is in progress. Click the "steam" button if you don't need it. Or wait until it warms up.
